Analysis of the Processing Process of Acrylic Display Shelves

Everyone knows that acrylic display racks are used by businesses to display products while also serving the purpose of arranging them neatly. They give customers the feeling of being tall and comfortable, which makes them feel happy. You never imagined that such an acrylic display rack would go through so many processes.
Why does the cutting operator enlarge the original size by 1mm during the advanced processing of acrylic display racks? Because the next process is to pass through the diamond polishing machine, which is used to process the rough surface of the board into a smooth surface. Therefore, it is necessary to increase the size by 1mm for the next process of cloth wheel polishing so that the edges thrown out will be smoother than the raw materials. Next is the side plate. As the side plate has an irregular shape, this process needs to be carried out on the laser cutting machine. The master will edit the program and then place the material on the equipment for the employee to operate, We choose to use hot bending for the steps. During the hot bending process, we must pay attention to the control of the temperature, otherwise it is easy to bubble. The temperature of the fire groove is determined by the different thickness of the material. If the temperature is high, it is easy to bubble and melt, but if the temperature is low, it cannot be bent. Finally, it is about bonding. When bonding, it is important to prevent the glue from flowing out and ensure proper positioning. Simply put, the processing steps include cutting, diamond polishing machine, cloth wheel polishing machine, laser cutting machine, sticker, scratch resistant hand treatment, quality inspection, hot bending, bonding, quality inspection, cleaning, and packaging.